Traveling with Dexcom G7: Airport Security, Packing & Flight Tips (2026)

Traveling with a Dexcom G7 is straightforward once you know the rules. The device is waterproof, compact, and continues working normally on planes. But the details matter, especially the key differences between G7 and G6 security rules, the international app reinstallation issue that catches travelers off guard, and how to keep sensors adhered during active travel days.

This guide covers everything directly from Dexcom's published guidance, so you're not relying on outdated forum posts or generic advice.

Dexcom G7 at Airport Security

Dexcom has published clear guidance for the G7 at airport security. Here is what it says:

• You can wear the G7 sensor through walk-through metal detectors
• You can wear the G7 sensor through AIT (Advanced Imaging Technology) full body scanners
• You can request hand-wanding or a pat-down instead if you prefer
• Extra G7 sensors in your bag can go through luggage X-ray scanning safely
• Your smartphone or receiver goes through the tray with your other electronics

A note from my own travel: I wear the Dexcom G6 myself, and I have never opted out of the body scanner. I have never noticed sensor problems afterward. That is my personal experience, not guidance, and it runs against what Dexcom officially advises G6 users. Follow the manufacturer guidance above if you want the safe play. I have not switched to the G7 yet, so this guide is built from Dexcom's published guidance, not my own sensor.

What to Say at Security

Before you step into any scanner, tell the TSA officer: "I'm wearing a Dexcom G7 continuous glucose monitor on my body, it's a medical device I cannot remove." This sets up the interaction clearly. Most officers are familiar with CGMs and will direct you through quickly. If you prefer not to go through the body scanner, simply add: "I'd prefer a pat-down please." Officers cannot refuse this request.

At Security: Quick Reference

Using the Dexcom G7 on a Plane

The G7 works normally during flights. Here's exactly how to set it up:

Smartphone Users

1. Put your phone in airplane mode
2. Keep the Dexcom G7 app running (do not close it)
3. Manually enable Bluetooth after airplane mode is on
4. The app continues receiving glucose readings normally via Bluetooth throughout the flight

Receiver Users

Simply keep your Dexcom receiver on as normal. The receiver does not need to be in airplane mode. It communicates with your sensor via Bluetooth and continues working throughout the flight.

At Security Checkpoints

Most security checkpoints will ask you to temporarily hand over your smartphone and receiver as they go through the X-ray. During this brief window, you won't have a display device showing your G7 readings. Use your backup blood glucose meter for any treatment decisions during this time. The G7 sensor continues collecting data, readings will appear again as soon as your phone or receiver is back in Bluetooth range.

How Many Dexcom G7 Sensors to Pack

Each Dexcom G7 sensor (10-day) lasts 10 days, with a 12-hour grace period. The 15-day G7 lasts 15 days with the same grace period.

Dexcom's own travel guidance says: "Pack extra sensors, overpatches, and chargers." Sensors can fail early, fall off in heat or water, or get damaged. Always bring at least one extra beyond what the math says you need.

Keeping the G7 Adhered During Travel

Adhesion is the biggest practical challenge when traveling with a CGM. Heat, sweat, swimming, and active days all stress the sensor adhesive more than normal daily life. Here's how to manage it:

Before Placement

• Skin Tac wipes applied to clean, dry skin before placing the sensor dramatically improve adhesion. The wipe creates a tacky adhesive barrier. Let it dry completely before placing the sensor over it. This is one of the most widely recommended travel practices in the T1D community.
• Alcohol wipes first to remove oils and residue, then Skin Tac, then sensor. Always let each layer dry before the next step.
• Change your sensor 1–2 days before a long trip, not the morning of. A sensor that has had 48 hours to settle is more securely adhered and more accurate than a fresh one.

After Placement

• CGM overpatches made for the Dexcom G7 reinforce the edges of the sensor patch. This is especially useful for beach trips, hiking, or any trip involving significant sweating or water exposure. Apply it over the existing sensor adhesive.
• Press the edges of the overtape down firmly after application and let it set for a few minutes before exposing to water or activity.

International Travel with Dexcom G7: Important App Warning

This is the most important section for anyone traveling internationally with a G7, and it's something most guides miss entirely.

The App Reinstallation Problem

The Dexcom G7 app must be installed in your country of residence. Dexcom's own user guide says the first install verifies that your location matches your account country. The practical consequence for travelers: if you uninstall the app while abroad, you may not be able to reinstall it from the local app store. So do not uninstall the G7 app while traveling internationally, for any reason.

The good news: an app that is already installed keeps working abroad. The restriction applies to new installs, not to using the app you brought with you. Still, bring the receiver as a backup display device, because a lost or broken phone abroad leaves you with no way to get the app back.

I wrote a full guide on this, including what to do if the app stops working mid-trip: Dexcom G7 international travel and app region locks.

What to do before an international trip:

• Check your G7 app version before leaving home
• Turn off auto-update on both your phone and the G7 app before departure, an automatic update abroad can cause issues
• If you experience an error message about your location, do not uninstall and reinstall the app, sign back in to the existing app instead
• Consider bringing a Dexcom receiver as a backup display device for international trips

What to Do If Your Phone Is Lost or Damaged Abroad

If your phone is lost, stolen, or damaged during an international trip and you cannot reinstall the G7 app:

• Use your Dexcom receiver if you brought one, this is exactly why bringing the receiver is recommended for international trips
• Contact Dexcom support (available internationally) for guidance
• As a last resort, use your backup glucose meter until the phone situation is resolved

Storing G7 Sensors During Travel

Dexcom G7 sensors should be stored at room temperature, between 36°F and 77°F (2–25°C). Keep them away from direct sunlight and extreme heat. Store them in your carry-on bag, not checked luggage, for the same reasons as insulin, temperature extremes and loss risk.

For travel to hot climates, an insulated pouch or small cooler bag for your supplies keeps everything at a stable temperature. Sensors don't need refrigeration, but consistent moderate temperatures extend their reliability.

Dexcom G7 Travel Checklist

• ☐ Pack at least 2 sensors for trips up to 10 days (3 for longer)
• ☐ Pack Simpatch G7 overtape patches
• ☐ Pack Skin Tac wipes for improved adhesion
• ☐ Pack backup glucose meter and strips
• ☐ Pack alcohol wipes for sensor prep
• ☐ Change sensor 1–2 days before departure, not day-of
• ☐ For international: do not uninstall the G7 app while abroad, it may not reinstall outside your home country
• ☐ For international: turn off auto-update on phone and G7 app
• ☐ For international: bring Dexcom receiver as backup display
• ☐ Know your security approach: notify officer, wear through scanner or request pat-down
• ☐ On plane: airplane mode on phone, Bluetooth on, app continues working
• ☐ Backup meter in pocket (not bag) during security screening
• ☐ All supplies in carry-on, never checked luggage
• ☐ Carry a doctor's letter for international travel listing your CGM